0.2-2.0mmx850mm cutting to length line with guillotine

0.2-2.0mmx850mm cutting to length line with guillotine

Cutting line is used for cutting flat rectangular blanks from main coils. For widths of up to 850 mm, thicknesses of up to 2.0 mm and speeds of up to 150 m/min, this line is suitable for thin materials.

The lines can be supplied with start-stop shears, flying shears, rotating shears or continuous direct feed. Air cushion, bomb-door type, electromagnetic or vacuum stackers. High-precision levellers, computer controlled. Edge trimming may be incorporated..

Totally computer-controlled with diagnosis, automatic coil feed and quality control.

For carbon steel, exposed and non exposed material, stainless steel, pre-painted steel, aluminium and other metals.

If you are interested in cutting to length line, please feel free to contact with me, thanks!

Email: rani@he-machine.com

Wechat/Skype: rani8933

What'sapp: 008613670014833

0.3-3.0X1300 Slitting line

0.3-3.0X1300 Slitting line

Slitting line is for cutting narrow coils from main coils. For widths of up to 1300 mm, thicknesses of up to 3.0 mm and speeds of up to 160 m/min.

The lines are composed of decoiler, leveling machine, loop, high-precision slitters, tensioning device and recoiler. High-capacity recoilers . Extraction from coils without banding. Scrap ballers or scrap choppers. Moving tensioning devices with incorporated levelling.

Totally computer-controlled with diagnosis, automatic coil feed and quality control.

It's suitable for stainless sheet, GI,  carbon steel, exposed and non exposed materials , pre-painted steel, aluminium and other metals.

We also can custom-made according to your requirement.

If you are interested in slitting line, please feel free to contact with me, thanks!

E-mail: vanessa@he-machine.com 

Mobile/whatsapp:+0086 135 1016 9882Skype:zhechiqingniao3

slitting line for 0.3-3.0mmx1650mm

Slitting line for 0.3-3.0mmx1650mm

 Slitting Line is used to break master coils down into smaller coils of a specific width and or weight.  A Slitting Line will uncoil a master coil and slit it to a specified width(s).  The slit coils sometimes referred to as “mults” or “strips” are then recoiled.  The finished slit coils produced by Slitting Lines are used in a wide variety of applications such as roll forming, stamping operations, and tube production.  When considering a Slitting Line and the proper line configuration for your application, there are several variables you should consider.  The thickness of the material, the type of material, the weight of the coils to be produced, as well as annual volume to be processed all influence the line configuration and capabilities required for a successful installation. 


If you are interested in it, please feel free to contact with me,thanks!
Email: rani@he-machine.com
Wechat/Skype: rani8933
What'sapp: 008613670014833