AFTER LEVELING THE SHEET METAL IT IS STILL NOT FLAT – WHAT CAN BE DONE?
Three possible main causes are: If the sheet-metal part is still bent in the same direction as before leveling, then the levelers entry setting was set too soft The sheet-metal part is under-leveled. This can be fixed with a second pass through the leveler and a tighter entry setting. If the sheet-metal part is bent in the opposite direction than before leveling, the leveler was set too tight at the entry. The sheet-metal part is over-leveled. The operator should check if the exit value is set to the sheet-metal thickness and if necessary open up the entry setting. It is also possible that the sheet-metal part simply cannot be leveled on this leveler type or size. The next thing to do check is whether the material can be leveled on a different leveler or whether the material cannot be leveled at all.
If you want to know more about HONGER straightener machine, pls feel free to contact me.
Shenzhen Hong-Er Machine Equipment Co.,LTD
Mobile/whatsapp:+0086 135 1016 9882
Skype:zhechiqingniao3
QQ:1755965744
Website:www.hongerjixie.com
www.feedermachine.com
没有评论:
发表评论